Home » Mirrorprofiles NAM A2 Amp Pack 27 – METALCORE+
Mirrorprofiles NAM A2 Amp Pack 27 – METALCORE+
Drum Kits / Sample Packs

Mirrorprofiles NAM A2 Amp Pack 27 – METALCORE+

Quality100% Free

Mirrorprofiles NAM A2 Amp Pack 27 – METALCORE+ is a collection of 23 Neural Amp Modeler captures taken from both channels of an EVH 5150 III, capturing the amp-head signal path without a speaker cabinet. It loads into the free Neural Amp Modeler plugin or any compatible hardware device accepting .nam files, and requires a separate impulse response after the NAM instance for a complete signal chain.

Mirrorprofiles NAM A2 Amp Pack 27 - METALCORE+

Captures are provided in standard A2 architecture plus legacy A1 and xSTD formats for older NAM implementations. Its differentiator within the 5150 family is tonal position: the developer positions the 5150 III as tighter, more articulate, and more naturally voiced than the newer EVH-branded line, and less loose than the original Peavey 5150 — a specific tonal claim against two identifiable reference points rather than a generic “high-gain amp” description. For any producer comparing 5150 III captures specifically against the original 5150 or the newer EVH line, this is that comparison resolved.

Key Takeaway

Activates when a session needs the specific front-end tightness and midrange articulation of the 5150 III rather than the original 5150’s looser feel or the newer EVH line’s more processed character, in a NAM-compatible format. Works inside any DAW with the free NAM plugin, on hardware units accepting .nam files, and in Push 3 standalone through compatible M4L wrappers. Doesn’t include a speaker cabinet — these are amp-head-only captures and require a separately loaded IR to produce a complete guitar tone, meaning a dedicated IR loader and cabinet selection are required before the signal is mix-ready.

23 Captures Across Green and Red Channels

The 23 models span both the green channel and the red channel of the 5150 III, covering two structurally different amp personalities in the same pack. The green channel provides clean-to-crunch headroom, with captures taken in both crunch-enabled and crunch-disabled states — the two green channel modes produce meaningfully different tonal results, with crunch mode adding saturation and midrange density that disabled mode doesn’t include. The red channel is the 5150 III’s high-gain circuit, built for the sustained, aggressive distortion the amp is known for in metalcore and hard rock production contexts.

This two-channel scope means the pack covers rhythm and lead territory from the same amp rather than only documenting the red channel’s high-gain sound. A session that needs both clean and saturated tones from a consistent source can use green and red channel captures from the same pack rather than sourcing a separate clean amp capture from a different developer’s library — the tonal character of both channels originates from the same hardware session rather than being assembled from mixed sources.

A2 Architecture Plus Legacy Format Support

Captures are provided in three architectures: standard A2, legacy A1, and xSTD. The A2 standard is NAM’s current primary architecture, supported by recent versions of the NAM plugin and current-generation hardware devices. A1 and xSTD are earlier formats retained for compatibility with older NAM implementations, older hardware firmware, and devices that haven’t received or don’t support firmware updates enabling A2. Including all three formats means the pack works across the full installed base of NAM-compatible hardware and software rather than only on current-version implementations.

The May 2026 initial release of this pack included only A2 and xSTD; the July 4 update added A1 format. Engineers who downloaded the pack at initial release and use a device requiring A1 format should download the current version to access the legacy architecture capture set.

Input Calibration Metadata and Signal Chain Requirements

Each capture includes embedded input level calibration metadata at 13dBu — the standard calibration level used across professional NAM capture workflows. This metadata allows compatible NAM loaders and hardware devices that read calibration data to set the appropriate input gain level automatically rather than requiring manual level-matching before the capture behaves as intended. At 13dBu, the captures are calibrated to accept a typical high-output electric guitar signal and behave with the same headroom and saturation response as the original hardware.

These are amp-head-only captures with no speaker cabinet included. The Neural Amp Modeler plugin is a loader only — a raw amp capture without an IR produces an unnaturally bright, direct signal that doesn’t represent a complete guitar tone. A high-quality IR loaded after the NAM instance is required before the signal is mix-ready, whether through NAM’s built-in IR loader or a dedicated external IR loader. Boost pedal emulation placed before the NAM instance — a Tube Screamer-style plugin at zero drive with tone to taste — is standard practice for tightening the low end of high-gain captures and applies equally to this pack.

Tonal Position in the 5150 Family

The developer’s own framing places the 5150 III in a specific position relative to the broader 5150 family: more articulate and front-end-tight than the original Peavey 5150 (which the developer characterizes as looser), and more natural-sounding and physically larger than the newer EVH-branded 5150 variants (which the developer implies are more processed and smaller-sounding). This is an uncommonly specific claim for a capture developer to make about their own product — naming two adjacent reference points and stating in which direction this amp sits relative to both.

For a producer who has used free or paid NAM captures of the original 5150 or the EVH Stealth and found them either too loose or too processed, these claims map directly to testable session behavior: the 5150 III captures should feel tighter and more immediate than the former, more physical and less polished than the latter. The developer’s direct positioning also implies where the pack’s tonal character won’t suit — sessions needing the specific sag and looseness of the original blockletter 5150 will find these captures deliberately engineered away from that character rather than toward it.

Tighter Than a Blockletter, Less Processed Than the EVH Line — Amp Head Only

The 5150 III’s specific tonal position within the 5150 family is the pack’s whole case: articulate where the original sags, natural where the newer EVH line polishes — but no IR means no complete guitar tone until the signal chain is finished.

Mirrorprofiles NAM A2 Amp Pack 27 – METALCORE+

buttondownload

Fresh discounts and freebies in the sidebar, updated with new picks.

Leave a Reply

Your email address will not be published. Required fields are marked *

Mirrorprofiles NAM A2 Amp Pack 27 – METALCORE+

ZIP • Free